First read the installation and user manual supplied with the device, as well as the online manual.
Configure the following parameters in the web interface or via my-PV Cloud:
| Setting | Value / Comment |
|---|---|
| Control source | Modbus TCP |
| Power time-out | 60 seconds |
These settings can be applied directly on the device, via the web interface, or through my-PV Cloud.
Notes & Limitations
Perform the following steps in the web interface of SmartgridOne Controller:
You will be asked: "What kind of device do you want to add?"
Choose MYPV from the list of manufacturers.
You will be asked: "Which device model are you adding?"
Select the correct model, for example:
SmartgridOne Controller will perform a network scan. In the "Device network parameters" screen, you can add the device:
In the "Device/group settings" screen, configure the specific settings for the my-PV device.
| Setting | Example value | Comment |
|---|---|---|
| Is the device single or three phase? | Single phase | Select the correct phase configuration |
| Normal power (W) | [device-specific] | Nominal power of the my-PV device |
| Operating voltage | Same as the main device | Operating voltage |
| Normal voltage type | Phase-neutral | Select voltage type (Phase-neutral or Phase-phase) |
| Normal voltage (V) | 2300 | Nominal voltage in Volts (e.g. 230V × 10) |
Don’t forget to click the Save button at the bottom of the page.