Huawei Energy Meters
| Device Type | Modbus TCP (Ethernet) |
|---|---|
| Energy Meter via Smartlogger | ✅ |
The Huawei SmartLogger can be used to read and control energy meters/solar inverters/batteries.
For correct ethernet wiring: Follow the .
The smartlogger can connect both inverters and energy meters via 3 COM ports. Adding and giving Modbus addresses can be done automatically or not.
However... all Modbus addresses must be different!
To adjust this, it is best to first adjust the possible addresses per COM port so that there is no overlap.
Then you remove the devices with the same address and add them back with an address different from all other devices.
