DevicesWater meter
Eniris Pulse‑based Water Meters
Supported Devices
The integration is intended for any water meter that offers a clean pulse
output (normally‑open or normally‑closed contact). Typical examples are the
popular ZENNER, Itron, Kamstrup, or Sensus models equipped with
pulse modules – but any dry‑contact 1 pulse = x l counter will work.
| Device Type |
|---|
| Generic pulse water meter |
Wiring
Pulses are read via the digital input (DIA/DIB) of the Controller or Smart Grid Controller. Wire the meter’s open‑collector or reed switch as illustrated below:
- Polarity does not matter for dry contacts.* Use twisted pair cable for long distances (> 10 m) to minimise interference.