Jinko | SmartgridOne Documentation

DevicesPV hybrid and battery inverters

Supported Devices

Device Type	Modbus TCP (Ethernet)	RS485	Curtailment
SunGiga	✅	❌	❌

1a. Connect the LAN (Ethernet cable) to the RJ45 port on the Jinko SunGiga.

iWell

Kaco

Steps
2a. Open the Jinko SunGiga web interface by entering the IP address of the system in a web browser.
2b. Make sure High priority local control and Enable total active power setting are configured as Close:
2c. Make sure Remote/Local is configured as Remote: