The MidTeQ inverter is all-in-one hybrid inverter that can be used with the SmartgridOne Controller to monitor and control your solar power and battery system. It supports both Modbus TCP and Modbus RTU (RS485) communication protocols.
Supported Devices
| Device Type | Modbus TCP (Ethernet) | RS485 | Curtailment |
|---|---|---|---|
| PrimePower Hybrid inverter Inverter | ✅ | ✅ | ✅ |
The MidTeQ inverter has a nominal power output of 10 kW, regardless of the battery energy capacity. Make sure to configure the inverter correctly in the SmartgridOne Controller to match your system's specifications. However, the maximum charge and discharge power depends on the battery energy capacity. See the table below for the correct settings. If the maximum charge and discharge power of your MidTeQ inverter is not set to correctly in the SmartgridOne Controller, it leads to unstable operation of the inverter.
| Battery energy capacity | Maximum charge and discharge power |
|---|---|
| 5 kWh system | 🟠 2.6 kW charge and 2.6 kW discharge to be configured in the device settings. |
| 10 kWh system | 🟠 2.6 kW charge & 5.2 kW discharge to be configured in the device settings. |
| 15 kWh system | 🟠 5.2 kW charge & 7.6 kW discharge to be configured in the device settings. |
